genncom.com V2.43

Usage:
1. Change BIOS setup, so that IRQ 9 will be reserved for legacy ISA.
2. Restart the system.
3. Copy genncom.com and chkncom.exe into one directory
4. Insert all cards into PCI slots ( as many as possible )
5. Programm all cards' EEProms
6. change into directory containing genncom.com and chkncom.exe.
7. run genncom.com
8. watch output.

genncom generates configuration files for chkncom and starts it.

Following command line switches are recognized:
BAUDMULTI=<number>    - baud multiplier
RS4XX                 - switch on RS422/485 checks
SILENT                - silent operation, it programs chkncom and chk4com will be started with option /s
		        and the return value gives the result
CLKERR=<number>	      - Maximum error while testing baud rate. Value in 10ths of percent.
SPEED=<number>        - speed at wich the test should run.
TICKS=<number>        - duration of the test in timer ticks.
FIFOLENGTH=<number>   - transmit fifo length to be used.
LOOPBACK	      - force loopback usage
NCOMTMPLT=<filename>  - with this option a templete file for chkncom can be specified. The file has the same syntax
                        as chkncom.cfg except that COMxBASE and COMxIRQ will be overwritten. Also Options specified
                        on the cmmand line overwrite settings from the template.
4COMTMPLT=<filename> - as NCOMTMPLT but for chk4com (parallel ports).